Nagel Foldnak 100, Руководство по эксплуатации

Страница: 25 / 36

© Ernst Nagel GmbH 9965043 Operations manual Foldnak 80-100 Trimmer 100.doc Rev.1.3 23.10.2006 25
Service
It is possible to check every actuator and sensor from the service submenu.
Submenu Foldnak Actuators
Description Connector
on PCB Pins Signal
FA1 SOLENOID Solenoid Staple stop J18 1: GND; 5: 24 V
FA2 MAIN MOTOR Main motor via SSR J18 2: GND; 6: 24 V
FA3 STAPLE Clutch CB6 Stapling J18 3: GND; 7: 24 V
FA4 FOLD Clutch CB5 Folding J18 4: GND; 8: 24 V
FA5 AUX1 ERR S8 Error FK at S8 J19 1: GND; 9: 24 V
FA6 AUX2 Input sensor at S8 J19 2: GND; 10: 24 V
FA7 AUX3 Trimmer error at S8 J19 3: GND; 11: 24 V
FA8 AUX4 -- J19
FA9 AUX5 -- J19
FA10 AUX6 -- J19
FA11 AUX7 -- J19
FA12 DELIVERY Delivery J19 8: GND; 16: 24 V
FA13 RELAY 1
FA14 RELAY 2
FA15 ERROR LED Error LED J20 1: GND; 2: 3 V
FA16 GREEN LED Error LED J20 3: GND; 4: 3 V
FA17 LED3 Error LED J20 5: GND; 6: 3 V
FA18 LED4 Error LED J20 7: GND; 8: 3 V
FA19 LED5 Error LED J20 9: GND; 10: 3 V
FA20 LED6 Error LED J20 11: GND; 12: 3 V
FA21 LED7 Error LED J20 13: GND; 14: 3 V
FA22 LED8 Error LED J20 15: GND; 16: 3 V
FA23 FINGER FORW.
FA24 FINGER BACKW.
1, 11 coil 1; 2, 12 coil 2
FA25 SIDEGUIDE CLOSE
FA26 SIDEGUIDE OPEN
3, 13 coil 1; 4, 14 coil 2
FA27 STAPLEPOS CLOSE
FA28 STAPLE POS OPEN
5, 15 coil 1; 6, 16 coil 2
FA29 FOLD POS CLOSE
FA30 FOLD POS OPEN
7, 17 coil 1; 8, 18 coil 2
FA31 ENDURANCE RUN Continuous run --
GND = Ground
SSR = Solid state relay