Nady Systems U-800 Скачать руководство пользователя

Страница: 3 / 24

U-800 RECEIvER

• Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and long-

range operation, up to 500 ft. (line-of-sight)

• 800 user-selectable UHF frequencies, with one-touch Autoscan open-channel automatic

selection

• ASC™ (Auto-Sync Channels) download feature sends selected channel information to

transmitter via IR sender for easy frequency synchronization

• Sophisticated IF filtering for optimal simultaneous operation of up to 14 systems in the

same location

• To facilitate multiple, simultaneous systems operation setup, the 800 selectable channels are

available from 10 optimized factory pre-set groups of up to 14 compatible channels and 5

additional user-select groups, all offering 800 channels each. All groups retain in memory the

previously selected channels for that group for easy setup subsequently in the same location.

• DigiTRU Diversity™ for maximum range and dropout protection

• 120dB Dynamic Range — the quietest and best sounding UHF wireless available at any price

• Tone Squelch™ for locking out potential interference, and special circuitry for noiseless

transmitter ON/OFF switching

• Dual front-panel permanently attached swivel antennas

• Front LCD panel displays A/B diversity, Group/Channel with frequency, ASC™ transfer

status, RF/AF level, Mute (squelch) level, and push On/Off power switch

• Back panel with Balanced XLR fixed Mic Level and adjustable Unbalanced ¼” jacks, audio

Line Level outputs with volume control and DC input jack

• Half-rack receiver design with unique snap-out, side panel locking tabs for single receiver

or dual receivers (side-by-side) optional rack mounting

• Externally powered with included DC adapter (120VAC/22VDC/400 mA)

• Choice of transmitters: UH-800 handheld Mic or UB-800 bodypack—lavalier (LT),

Headmic™ (HM), or instrument (GT)

UH-800 HANDHELD MIC TRANSMITTER

• Sleek metal housing with internal antenna for optimum aesthetics and durable long life

• Features the Nady DM -10D unidirectional neodymium dynamic cartridge for optimum

true sound, maximum feedback rejection and minimal handling noise

• 800 easily selectable channels via IR Sync download for easy synchronization with

receiver’s selected channel

• Easy accessible audio level adjustment for optimum sound

• Power On/Off and Audio Mute switch allows convenient audio muting with the

transmitter “ON”

• Status LED indicators for unit “ON” (green) and for low-battery alert “ON” (red)

• Convenient, economical operation with two AA alkaline or rechargeable NiMH batteries

Ub-800 bODYpACk INSTRUMENT TRANSMITTER

• Choice of transmitters: UB-800 bodypack—lavalier (LT), Headmic™ (HM), or instrument (GT)

• 800 easily selectable channels via IR Sync download for easy synchronization with receiver’s

selected channel

• Easy accessible input level adjustment for optimum sound

• Power On/Off and Audio Mute switch allows convenient audio muting with the transmitter “ON”

• Bicolor LED status indicator for unit “ON” and for low battery alert “ON”

• Convenient, economical operation with two AAA Alkaline or rechargeable NiMH batteries

• Ultra-compact housing, removable antenna and unique locking 3.5mm mini plug connector

for mic or instrument cable

3. SYSTEM FEATURES

Содержание U-800

























Результаты поиска

Содержание U-800

Отзывы:

Похожие инструкции для U-800

Бренды по названию

Популярные бренды

Nady Systems U-800, Руководство пользователя

Результаты поиска

Содержание U-800

Отзывы:

Похожие инструкции для U-800

Бренды по названию

Популярные бренды