IDENTIFICATION OF CONTROLS
FRONT PANEL
1 STANDBY BUTTON
•
Press this button to switch ON the VISO THREE from standby mode.
The Standby LED indicator will turn from amber to blue. Pressing
the STANDBY button again turns the unit back to standby mode.
•
Pressing the [OPEN/CLOSE] button will also automatically switch
ON the VISO THREE from standby mode and at the same time draw
open the disc tray.
•
Pressing the [PLAY/PAUSE] button will also automatically switch ON
the VISO THREE from standby mode and start playback if a disc is
loaded.
2 STANDBY LED
•
This indicator will light up amber when the VISO THREE is at standby
mode.
•
When the VISO THREE is powered up from standby mode, this
indicator will illuminate blue.
3 NAVIGATION and ENTER BUTTONS
The navigation [
/
] and ENTER buttons have various
applications specific to given modes. The middle round button is
designated as [ENTER] button; this is normally pressed to complete a
selection, procedure, sequence or other applicable functions.
AM/FM mode
Toggle [ENTER] button to switch between “Tune” and “Preset” mode.
Select “Tune” mode.
•
Pressing momentarily the TUNE [
] button will manually
scan the AM or FM band.
•
Press and TUNE [
] hold for more than 2 seconds to search
up or down; the VISO THREE’s tuner will stop at the next sufficiently
strong signal it encounters.
•
Note too that this function “wraps” and will continue searching up or
down from one end of the AM or FM band to the other.
Toggle [ENTER] button to switch between “Tune” and “Preset” mode.
Select “Preset” mode.
•
Use PRESET [
] to step up or down AM/FM Presets.
“Unused” presets are skipped over. Note that Presets must have
been previously stored.
Refer also to the item about STORING PRESETS (AM/FM) at the
LISTENING TO AM/FM RADIO section of the OPERATION page.
DAB mode (230V version model only)
•
Use the navigation [
] and ENTER buttons in combination
with the MENU button to select through applicable DAB menu
options.
Refer also to the LISTENING TO DAB RADIO section of the OPERATION
page.
CD/USB mode
•
Press [
] to skip forward or [
] to skip backward a track/file.
•
Press [
] during playback to rapidly scan forward or
backward the current track/file.
4 MENU
The MENU button has different applications depending upon the
selected mode.
•
At FM mode, this button will toggle between FM STEREO ON and
FM STEREO OFF. Select FM STEREO OFF for stations that have too
much interference or are too weak.
•
In DAB radio (230V version only), the DAB menu options are enabled
using the MENU button in combination with the navigation
[
/
] and ENTER buttons.
5 TONE
Toggle to select Bass, Treble, Balance, Tone Active or Tone Defeat.
Bass, Treble (Tone Controls)
•
Adjust the Bass or Treble level over a ±10dB range by rotating the
VOLUME control clockwise (or VR 3 [VOL ]) or counterclockwise
(or VR 3 [VOL ]).
Balance
The “Balance Center” setting provides equal level to the left and right
speakers.
•
Rotating the VOLUME control clockwise (or VR 3 [VOL ]) moves
the balance towards the right. Rotating the VOLUME control
counterclockwise (or VR 3 [VOL ]) moves the balance to the left.
Tone Active, Tone Defeat
•
Select “Tone Defeat” to bypass the Tone Controls effectively
defeating the effect of the tone control circuits. If “Tone Active” is
selected, the Tone Control circuits are active.
1
15
14
13
10
11
12
2
3
4
5
6
7
8
9
6
EN
G
LIS
H
PO
R
TU
G
U
ÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
