NAD 510, Руководство пользователя, Страница: 4 / 28

QUICK START
1. Use the phono-to-phono lead to connect the
NAD 510’s left & right outputs to the CD Input of your
amplifier or receiver.
2. Plug in the AC power cord.
3. Press the POWER button to turn the NAD 510
on.
4. Press OPEN to open the CD drawer and place
the CD in the tray, label side up.
5. Press PLAY to close CD tray and start playing
from the first track.
6. Press PAUSE to stop the CD playing but keep-
ing the current position on the CD. To resume playing
the CD press PLAY.
7. Press Skip or to go to other tracks on
the CD.
8. Press Stop to stop the CD playing and return to
the start of the CD.
NOTES ON INSTALLATION.
Your NAD 510 should be placed on a firm, level
surface. Avoid placing the unit in direct sunlight, near
sources of heat and damp or in poorly ventilated posi-
tions.
The CD player comes with phono leads for connec-
tion to your amplifier or receiver. Switch the unit off
before making any connections. Ensure that leads
and connectors are not damaged in any way and all
connectors are firmly pushed home.
If the unit is not going to be used for some time,
disconnect the plug from the AC socket. Should water
get into your NAD 510, shut off the power to the unit
and remove the plug from the AC socket. Have the
unit inspected by a qualified service technician before
attempting to use it again.
Do not remove the cover, there are no user-ser-
viceable parts inside.
Use a dry soft cloth to clean the unit and the CD
Tray. If necessary, lightly dampened the cloth with
soapy water. Do not use solutions containing benzol
or other volatile agents.
As with most digital circuits, the processor inside
your CD player may radiate a small amount of electri-
cal ‘noise’ which could interfere with reception of very
weak radio or TV signals. If this occurs, move the CD
player away from the other devices or switch it off
when viewing or listening to broadcasts.
WARNING TO UK USERS. If this appartus is not
fitted with a UK three-pin plug, do not attempt to
insert the attached plug into a UK mains socket.
Instead, cut the plug from the mains lead and attach
a fused UK three-pin plug using the following safety
advice on wiring.
IMPORTANT. The wires in this mains lead are
coloured BLUE and BROWN;
BLUE: NEUTRAL BROWN: LIVE
The colours of these mains lead wires may not cor-
respond with the coloured markings identifying the
terminals in your plug. In this case the BROWN wire
must be connected to the terminal which is marked
L(ive) or coloured RED. The BLUE wire must be con-
nected to the terminal marked N(eutral) or coloured
BLACK. No connection should be made to the termi-
nal marked E or coloured green or green and yellow
REAR PANEL CONNECTIONS
1. LINE OUTPUT
The 510’s analogue audio output. Using the sup-
plied twin phono-to-phono leads, connect to the left
(white) and right (red) outputs of the NAD 510 to the
‘CD’ input or other line-level input such as ‘Aux In’ of
your amplifier or receiver. Do not connect this cable
to the amplifier’s PHONO input jacks.
2. AC LINE CORD.
Connect this power cord to an AC mains wall outlet
Plug the AC power cord into a live AC wall socket
or to an AC convenience outlet at the rear of your
amplifier.
FRONT PANEL CONTROLS
1. POWER ON/OFF.
POWER switches the player on or off. Pressing the
power switch turns the CD player on, indicated by the
Display Panel becoming active. Pressing the POWER
button again will switch the player off.
When switched Off, no power is supplied to the
NAD 510’s electronics.
CAUTION: Disconnect your NAD 510 from the AC
outlet when it is not being used for long periods of
time.
2. CD TRAY
CDs should be placed in the CD Tray, label side
up. The CD Tray has two recesses to securely hold
either 5” or 3” CDs. 5” CDs sit in the larger recess
and 3” CD singles in the smaller central recess.
Use only Audio CDs in your NAD 510. Do not use
CD-V, CD-ROM CD-i or Photo-CD discs in this play-
er, it will not be able to decode and play them.
CAUTION: Do not put anything except a compact
disc into the tray. Foreign objects can damage the
mechanism.
3. OPEN
The OPEN button controls the CD Tray. Press
OPEN to open the Tray. The Display Panel will show
the word ‘OPEN’.
Press OPEN again to close the tray. The NAD 510
will then close the tray completely. Do not use physi-
cal force to close the tray as this can damage the
drawer mechanism. Always use the OPEN button to
open or close the disc drawer.
With a CD loaded and the tray closed, the CD
Player will scan the disc and Display Panel will show
NAD
4
GB NAD 510 COMPACT DISC PLAYER