English
- 11 -
Switching On/Off
To Switch the Display On
Connect the power cord to a power source such as a
wall socket (220-240V AC, 50 Hz).
To switch on the Display from standby mode either:
• Press the
Standby
button,
Pro/-
or a
numeric button on the remote control.
• Press the control button on the Display.
To Switch the Display Off
• Press the
Standby
button on the remote control.
• Press the control button on the Display, the function
options menu will be displayed. The focus will be
on the
Standby
option. Press and hold the button
for about 2 seconds to activate this option. The
icon colour of the option will change. Then press
the button once again, the Display will switch into
standby mode.
To power down the Display completely, unplug the
power cord from the mains socket.
Note:
The LED can blink when you switch on the Display
from standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press
OK
. In the following steps of
the installation guide, set your preferences using the
directional buttons and
OK
button.
On the second screen set your country preference.
Depending on the
Country
selection you may be asked
to set and confirm a PIN at this point. The selected PIN
cannot be 0000. You have to enter it if you are asked
to enter a PIN for any menu operation later.
You can activate
Store Mode
option in the next step.
This option will configure your Display’s settings for
store environment and depending on the Display
model being used, the supported features of it may be
displayed on the screen as an info banner. This option
is intended only for store use. It is recommended to
select
Home Mode
for home use. This option will be
available in
Settings>System>More
menu and can
be turned off/on later. Make your selection and press
OK
to continue.
Depending on the model of your Display and the
country selection
Privacy Settings
menu may
appear at this point. Using this menu you can set
your privacy privileges. Highlight a feature and
use Left and Right directional buttons to enable or
disable. Read the related explanations displayed
on the screen for each highlighted feature before
making any changes. You can use
Programme
+/-
buttons to scroll up and down to read the entire
text. You will be able to change your preferences at
any time later from the
Settings>System>Privacy
Settings
menu. If the
Internet Connection
option is
disabled
Network/Internet Settings
screen will be
skipped and not displayed. If you have any questions,
complaints or comments regarding this privacy
policy or its enforcement, please contact by email at
Highlight
Next
and press
OK
button on the remote
control to continue and the
Network/Internet Settings
menu will be displayed. Please refer to
Connectivity
section to configure a wired or a wireless connection.
If you want your Display
to consume less power in
standby mode, you can disable the
Wake On
option
by setting it as
Off
. After the settings are completed
highlight
Next
and press
OK
button to continue
.
In the end, Amazon Alexa setup screen will be
displayed. Refer to
Alexa Ready
section to learn more
about feature and the setup process.
Note:
Do not turn off the Display while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (HDD with external power
supply) external hard disk drives or USB memory stick to your
Display by using the USB inputs of the Display.
IMPORTANT!
Back up the files on your storage
devices before connecting them to the Display.
Manufacturer will not be responsible for any file
damage or data loss. Certain types of USB devices
(e.g. MP3 Players) or USB hard disk drives/memory
sticks may not be compatible with this Display. The
Display supports FAT32 and NTFS disk formatting.
Wait a little while before each plugging and unplugging
as the player may still be reading files. Failure to do
so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
while playing a file.
You can use USB hubs with your Display’s USB inputs.
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the Display’s USB input(s)
directly, if you are going to connect a USB hard disk.
Note:
When viewing media files the
Media Browser
menu
can only display a maximum of 1000 media files per folder.
Media Browser
You can play back music and movie files and display
photo files stored on a USB storage device by
connecting it to your Display. Connect a USB storage
device to one of the USB inputs located on the side
of the Display.
After connecting a USB storage device to your Display
Media Browser
menu will be displayed on the screen.
You can access the content of the connected USB
device any time later from the
Sources
menu. Select
the related USB input option from this menu and press
OK
. You can also press the
Source
button on the
