manualshive.com logo in svg

Nabco GYRO TECH GT-1175, Руководство по установке

Поделиться
Скачать
Nabco GYRO TECH GT-1175 Скачать руководство пользователя страница 5

Rev. 8-25-16 

Part #C-00121

www.NabcoEntrances.com

ElectricalInstallationManualU-30“D”Control

 iii

WARNING LABELS

Warning labels are universal and used to alert an individual of potential harm to one’s self or to others. The following warning 

labels are listed in a hierarchy order that defines the most potential danger first, and the least potential danger last. Please refer 

to this page in the event that a warning label is displayed within this manual and further definition needs to be explained.

Indicates potentially dangerous situations. Danger is used when there is a hazardous 

situation where there is a 

high

 probability of severe injury or death.  

It should not be considered for property damage unless personal injury risk  

is present.

Indicates a hazardous situation which has 

some

 probability of severe injury.  

It should not be considered for property damage unless personal injury risk  

is present.

Indicates a hazardous situation which 

may result in a minor injury

. Caution  

should not be used when there is a possibility of serious injury. Caution should  

not be considered for property damage accidents unless a personal injury risk  

is present.

Notice:    Indicates a statement of company policy as the message relates to the personal safety or 

protection of property. Notice should not be used when there is a hazardous situation or 

personal risk.

Attention: A situation where material could be damaged or the function impaired.

Note:       Indicates important information that provides further instruction.

DANGER

WARNING

CAUTION

Содержание GYRO TECH GT-1175


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды