Nabco GYRO TECH GT-1175, Руководство по установке

Страница: 15 / 33

Rev. 8-25-16 Part #C-00121
www.NabcoEntrances.com ElectricalInstallationManualU-30“D”Control
IdentifyOperatingWires 4-13
Rocker Switch
Mode
Key Switch
Mode
Wire
M0
Wire
M1
Wire
H
Description
One Way Exit ON OFF
-
X Sensor on Terminal (3) can open the door.
• Sensor is normally Interior and used to activate door
for one-way traffic.
X Sensor on Terminal (8) can not open the door from the
closed position.
• Sensor is normally Exterior and used to provide
threshold safety only.
• Electric Lock remains locked unless an activation
occurs from the interior sensor or by a device (such
as a card reader, key switch, wall plate, etc.) that is
connected in one of two ways:
1.►Between Common and M1 (6)
a.►This only works when door is in “One Way” or
“Exit” mode.
2.►Between Common and SLS (11)
a.►This only works if the SLS is programmed for
activation devices.
Note: Consult the U30 Programming Manual for details;
(P/N 15-9000-30).
Full Open Full
- -
OFF X Upon activation or in Hold Open mode, Slide door will
open to the full position.
Reduced Open Reduced
- -
ON
X
Upon activation, Slide door will open to the Reduced
Open position.