8
Example: The following example illustrates how to use CLI commands.
The command
status <E | D> [ports]
is used to enable or disable 608MFX ports. The user
enters the following:
status
followed by a blank and then the mandatory setting either
E
(=
enable) or
D
(= disable) and then the optional port numbers as described in Table 3–1. If you
do not enter a port number, the command applies to all ports.
•
To enable the ports 2, 4, 6 to 8:
Enter
status E 2,4,6-8
and confirm with
[Return]
.
•
To disable ports 1 and 5 to 8:
Enter
status D 1,5-8
and confirm with
[Return]
.
CLI Menus and Description
The following tables contain the commands, CLI menus and a brief description. If
there are several alternatives for a command parameter, the default is always the
value to the extreme left.
Start Menu
You can display all the other menus from the start menu. This is displayed
immediately after you login and includes the following commands:
Table 3–2 Start Menu Commands
Command
Description
Comment
/
Returns you to the start menu
(available in every menu)
Home function
?
Displays the current menu again
(available in every menu)
Refresh function
restart
Restarts the 608MFX (available in
every menu).
Administrator only.
exit
Closes the CLI/TELNET session.
(available in every menu.)
info
Displays status information about
the 608MFX.
SYSTEM
Opens the SYSTEM menu.
The SYSTEM menu is
used to set the system
parameters.
