6
Enter your administrator or user password and press
[Return]
.
The CLI then displays the start menu and the prompt
CLI>
You can now activate the commands of the CLI.
Reset
You can reset the 608MFX by depressing and holding the Select/Set button. If
necessary, depress the Select/Set button until the diplay mode LEDs indicate the port
status (all diplay mode LEDs = OFF). Then, press the Select/Set button for at least 6
seconds. The diplay mode LEDs begin to flash after ~3 seconds, and then 2 seconds
later the 608MFX is reset (All LED’s go briefly on and then off again).
This also restores defaults to the 608MFX (except those that are persistent). The
reboot menu is displayed below.
