17
Table 3–6, Settings in the Switch Menu - Cont.
flow <D | E>
Enable | Disable the flow control
for all 608MFX ports
Administrator only
find
< MAC address >
Finds a MAC address in the FDB
table of the 608MFX. Also
specifies the ports to which a
received packet with this
(destination) address is sent.
The address must be
entered in hexadecimal
with blocks of two
hexadecimal digits
separated by hyphens, for
example:
08:-00:-06:01:FF:EF
lt
Displays the content of the FDB
table of the 608MFX
The addresses are
displayed in hexadecimal.
The ports to which the
address is assigned are also
displayed.
macuni
<MAC> <port>
Sets a static entry of a unicast
address in the address table.
Administrator only
macmulti
<MAC>
<port1,port2,..>
Sets a static entry of a multicast
address in the address table.
Administrator only
macerase
<MAC address>
Deletes a static entry of an address
in the address table.
Administrator only
Port Menu
In this menu, you can make port–specific settings for the individual 608MFX ports.
Table 3–7 Settings in the Port Menu
Command
Description
Comment
info
Displays the current settings of the
608MFX ports.
For explanations of the
displayed parameters,
see below or refer to the
Glossary.
