© 2001, Myricom, Inc.
-- 2 --
Revision: 27 August 2001
Safety and EMC Certifications
This device complies with Part 15 of FCC Rules and all Class A
requirements for digital apparatus of the Canadian Interference
Causing Equipment Regulations. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Made in U.S.A.
from domestic
and foreign
components
Myrinet M3-E32
A label similar to that above appears on the back of M3-E16, M3-E32, M3-E64, and M3-E128
switch enclosures shipped after the corresponding certifications were received.
Safety.
Myricom is proud to employ TUV Rheinland of North America, Inc., to perform the
independent safety certifications for these Myrinet-2000 switch products. The M3-E16, M3-
E32, M3-E64, and M3-E128 were certified in accordance with the IEC System for Conformity
Testing and Certification of Electrical Equipment (IECEE), CB Scheme. In addition, TUV
certified these products to the US and Canadian safety standards.
Electromagnetic Compatibility (EMC).
Subject to the limitations listed below, Myrinet-
2000 switch products based on the M3-E16, M3-E32, M3-E64, and M3-E128 are within Class A
limits for emission of and susceptibility to electromagnetic interference (EMI).
•
An M3-BLANK filler panel must be used in any line-card slot without a line card.
•
The M3-E16 may use any combination of M3-M, M3-SW16-8F, M3-SPINE-8F, M3-
SW16-8S, M3-SPINE-8S, or M3-SW12-4L line cards.
•
The M3-E32, M3-E64, and M3-E128 may use any combination of M3-M, M3-SW16-8F,
or M3-SPINE-8F line cards.
EMI certification of additional configurations of line cards is in progress as of the date of this
revision. As additional EMI certifications are completed, they will be added to this document.
