myPOS Smart Technical Specification & Warranty (Updated March 2018) |
page 13
myPOS Smart N5 User Manual |
page 13
Magnetic stripe card
Magnetic stripe cards are swiped with the magnetic stripe facing up
through the reader located at the top side of the myPOS Smart N5 device.
Make sure that the card is inserted properly and the bottom of the card
runs firmly and at even speed. The speed of swiping the card must not be
too slow, as this can sometimes cause problems. If a PIN code is required,
ENTER PIN screen will be displayed.
If a chip card is swiped, the app will display a screen with instructions that
the card should be inserted into the chip reader.
The myPOS Smart N5 device will initiate the transaction authorization
process by communicating with myPOS. The Processing screen will indicate
that the procedure is not completed. If the transaction is approved by
the issuer confirmation message: “TRANSACTION IS APPROVED” will be
displayed.
Contactless cards
Hold the card (or smartphone) approximately 3cm above the NFC reader of
your myPOS Smart N5 device. When the contactless reader recognises the
card, the four-color indicators will flash. If the card is successfully read, all
four indicators will be on. After you hear a beep, you can remove the card
and return it to the customer.
If the card requires a PIN code, ENTER PIN screen will be displayed.
For step-by-step instructions how to accept payments please refer to
myPOS Smart N5 Built-In Apps User Guide
.
