mylife My-F41L, Руководство пользователя, Страница: 93 / 94

My Life Hot Tubs 2019 Owner’s Manual
DOC: OM-MYLIFE-19
93
Common Spa Water Problems
PROBLEM POSSIBLE CAUSE SOLUTION
CLOUDY WATER a) Organic contaminants build up
b) Suspended particles
c) pH high
d)Total Alkalinity too high
e) Hardness too high
f) Poor filtration
g) High dissolved solids
a) Shock treatment with a Spa Shock
b) Add a Brightener, use scum ball
c) Add pH reducer, until pH level reads 7.2 - 7.6
d) Add pH reducer, adjust total alkalinity to
80-150ppm
e) Add a Scale Preventative, circulate through a
water softener until hardness is 150-280ppm.
f) Dirty filter, clean with Cartridge Cleaner
g) Empty spa and refill
COLOURED WATER
a) Dissolved copper, iron and other
metals from source water or
equipment
b) Algae
c) Fragrance
a) Use Scale Preventative, have your dealer
check water balance
b) Add an Algaecide
c) Stop the use of fragrance
FOAMING a) High concentration of oils and
organic contaminants being
agitated by jets
b) Soft water
a) Squirt Defoamer on foam; use the scum ball
or spa ball
b) Add a Calcium Increaser until hardness is
150-280ppm.
SCALE DEPOSITS
High calcium level, high pH, high
alkalinity
Drain partially, add a Scale Preventative to
correct pH level to 7.2 - 7.6 and alkalinity to 80-
150ppm.
ODOUR High level or organic contaminants,
combined bromine
Shock with a Spa Shock
EYE/SKIN IRRITATION pH too low Add a pH Booster until level is 7.2 - 7.6
NO BROMINE READING High concentration of organic
contaminants using up sanitizers
Add sanitizers (bromine) until levels are up to
recommended range