mylife My-F41L, Руководство пользователя

Страница: 77 / 94

My Life Hot Tubs 2019 Owner’s Manual
DOC: OM-MYLIFE-19
77
ACCESSING FILTER CARTRIDGES
Our various spa models use different filter systems depending on the spa design. Identify which filter system is in
your spa and check ( √ ) it off for future reference.
TOP LOAD PRESSURE FILTER
1. Shut off your spa at the Ground Fault Circuit
Interrupter (GFCI) or Residual Current Detector
(RCD).
2. Remove the filter cover/drink tray.
3. Lift the lock tab to release the filter ring from the
filter body. Turn ring to remove it. Set aside.
4. Open the air bleed screw on the filter lid.
5. Pull up on the filter lid to remove. It is sealed with
an “o” ring on the outer edge. This can take
some force.
6. Remove the cartridge by lifting straight up.
7. Examine, clean, rotate or replace the cartridge as
necessary.
8. Reverse the procedure to install new or clean
cartridge.
9. Close the air bleed screw.
10. Ensure top ring’s locking tab is locked into the
filter body before restarting the spa.
11. Open air bleed screw slightly to bleed off any
entrapped air in the top of the filter body.
Note:
There is a drain built into the filter recess that
allows water to escape via a tubing line to a thru wall
fitting in the bottom of the corner.