Mylex DAC960PG, Руководство по установке

Страница: 51 / 106

Installation
Manual No. 771971 3-3
Installation Notes:
DAC960PG PCI to Ultra-SCSI RAID Controller Setup:
There are no jumper settings on the DAC960PG to be configured by the
user. Controller termination is automatic as long as the end of the SCSI bus
away from the controller is properly terminated. If there are devices
connected only to an internal connector or only to an external connector of a
channel, on board termination for that channel will be automatically
enabled. If there are devices connected to both the internal and external
connectors of the same channel, on board termination for that channel will
automatically be disabled.
SCSI Devices Installed:
Drive Channel 0
SCSI
ID
Device Description Termination
Enabled
Drive
Group
0 ___________________ ________ ______
1 ___________________ ________ ______
2 ___________________ ________ ______
3 ___________________ ________ ______
4 ___________________ ________ ______
5 ___________________ ________ ______
6 ___________________ ________ ______
7 Reserved for DAC960PG N/A N/A
8 ___________________ ________ ______
9 ___________________ ________ ______
10 ___________________ ________ ______
11 ___________________ ________ ______
12 ___________________ ________ ______
13 ___________________ ________ ______
14 ___________________ ________ ______
15 ___________________ ________ ______