8
③
System
Toggle through
Auto
,
Heat
,
Em Heat
(only if the system is a heat pump),
Off
, and
Cool
.
④
MyE Button
TM
This button is multi-functional. The first push causes all of the current settings to light
up on the display. Then, holding the button causes it to toggle between a Hold or Run
state for the set-point. Alternatively, it can be used in combination with another key as
described below.
⑤
Fan
Toggle through Auto and On.
⑥⑦
Up, Down
These buttons are used to change temperature set points or time (in the clock-setting
mode).
○
8
Set-point
Use Up and Down buttons to adjust the temperature set-point.
○
9
Room Temperature
Actual room temperature measured by the Thermostat in real time
○
10
MyE Leaf
TM
Change color according to the set-point: green means energy saving; red means
energy wasting; no leaf if it is in between.
○
11
Signal Strength
The status of wireless connection between the Thermostat and the Gateway.
11 12 13 14
16 17 18 19
15
