MyEnergy Domain MyE, Руководство пользователя

Страница: 10 / 17

10
Operations
Temporary Hold Set-point
 Press Up / Down button to adjust the set-point. The set point will start to flash for 5 seconds.
Then Temporary Hold is automatically set, and Hold sign on the LCD will flash to indicate
that the Thermostat is in Temporary Hold.
 While a Temporary Hold is in effect, pressing Up / Down buttons will change the set-point
without exiting the Temporary Hold mode.
 Temporary Hold will be automatically canceled when the next program comes up.
 During Temporary Hold, pressing MyE Button will cancel it and resume the normal program.
Permanent Hold Set-point
 Press Up / Down button to adjust the set-point, then immediately press MyE Button .
Permanent Hold is set, and Hold sign on the LCD will light up steadily to indicate that the
Thermostat is in Permanent Hold.
 While a Permanent Hold is in effect, pressing Up / Down buttons will change the set-point
without exiting the Permanent Hold mode.
 Permanent Hold will not expire unless MyE Button is pressed again.
Lock/unlock Keypad
Press MyE Menu buttons to toggle between the Lock and Unlock state of the keypad.
When the keypad is locked up, no change can be made through the thermostat key operations to
prevent children from tempering it. However, you can still control it via the smart phone app or the
web portal.
Reset Wireless Pair-up
Press MyE Connections buttons together. The Thermostat will re-initiate the process of
joining wireless network. Only do this operation when you want to pair up the Thermostat with a
different Gateway.
Switch between Online/Offline Control
All controls provided on the Thermostat panel can also be initiated from the smart phone app or
web portal. If you wish to switch to local control only, press
Connections button to make go
away. Then the Thermostat will not be controlled remotely, but you can still monitor its status.
Press Connections button again to re-enable internet controls.
Set Time
Normally, time is automatically synced by MyE server and you don’t have to do anything about it.
In case you have chosen local controls only, please follow the steps below if the time is off:
 Cycle the Menu button until
sign is shown.