Mycusini 00050, Руководство пользователя

Страница: 21 / 30

original operating instructions mycusini
For questions please contact us at service@mycusini.com
Choose „Calibrate“ Click "Yes" when you
want to start the calibration
In the interior of the mycusini is
located, at the rear left, a set
screw. By turning this screw the
distance of the cartridge tip to the
production plate can be adjusted.
Turning clockwise decreases the
distance and counterclockwise
rotation increases the distance
between the cartridge tip and the
production mat.
If the tip is in the position you want,
click "Done back to Menu" to get to
the main menu. When the tip is not at
the right height. Arrange the screw
again and click "Try again"
6.1.2 Extended Cleaning
The Extended Cleaning menu is intended for intensive cleaning of the stamp.
For intensive cleaning, select the
menu item "Extended Cleaning"
and confirm by pressing the
control knob
Confirm "Yes, clean now" to continue
cleaning
Please wait a moment until the
mycusini automatically moves to the
cleaning position
Open the cartridge holder and
remove it for cleaning the
mycusini.
Confirm by pressing "Removed"
when you removed the cartridge
holder
The stamp is now automatically
moved down.
Attention: The stamp is completely
detached from the device for
separate cleaning
Clean the stamp and confirm by
pressing the control knob
Back
Insert stamp
Info
► Calibrate .
Extended cleaning
Calibrate now ?
►
Yes
►
No
Turn the screw in the
back
►
Click to calibrate
Turn the screw again
or go back
►
Try again
►
Done, Back to Menu
Back
Insert stamp
Info
Calibrate
► Extended cleaning.
Start cleaning now?
►
Yes, clean now
►
No
Please wait while the
mycusini is moving