Mycusini 00050, Руководство пользователя

Страница: 19 / 30

original operating instructions mycusini
For questions please contact us at service@mycusini.com
5.4.2 Extended cleaning of the stamp
The advanced cleaning function enables to completely remove the stamp for
thorough cleaning under running water or in the dishwasher. The explanation of the
menu may be found in chapter 6. Further options of the menu, in chapter 6.1.2
"Extended Cleaning"
6 Further options
6.1 The menu during printing
You may access this menu by pressing the control knob while printing. A menu will
appear with the following options.
Note: both options will result in a loss of the current print data and your object will be
lost. The file on your storage is retained.
Press the control knob
6.1.1 Abort object
The "Abort object" option is to cancel the current printing. Select this menu item to
return to the object selection.
6.1.2 Abort and dose 3D choco
After cancelling your object, you can select a new object in this menu and in addition,
you can manually dose 3D Choco through the nozzle before starting the next print.
This option may be helpful, if no material leaves the nozzle after starting a print.
6.1 The „Maintenance“ menu
Select "Maintenance" in the main menu to access the extended service menu. There
you will find the following options.
6.1.1 Insert Stamp
This menu allows you to move the stamp upwards should it not have gone all the way up in
one of your previous steps or has been completely removed.
► Abort object
►
Abort and extrude
►
Back
Back
Insert Stamp
>>
Info >> .
Calibrate
>>
Extended Cleaning >>
Refill R █ EFI d 11 %
Temperature R █ EF I
Print: Simon 6,3 %