MyBinding Standard APC45 Programmable, Инструкция по эксплуатации

Страница: 25 / 54

17
Cutting Op
er
ation
b
y Pro
g
ra
mm
ed V
alue
O
per
ation
Pr
oced
ur
es
3-3 Cutting Operation by Programmed Value
This section explains the cutting operation
performed following the programmed pro-
cess.
When performing the same cutting process
repeatedly, or performing a complicated
cutting process, input each value of the
process in order beforehand, so that the
backgauge automatically moves into the
position for each step and makes the oper-
ation efficient.
Refer to “3-6 How to Program” for the pro-
graming and correcting the program.
Press the button.
- The LED on the upper left of the program but-
ton is illuminated and shows that the “cutting
operation by programmed value” is selected.
- The course number appears in the guide win-
dow.
Course Number:
“Course” is a program composed of a
series of the cutting steps. The course is
managed using the number 1 through 30.
Input the course number.
- Input using the numeric keypad.
- The value can be input in the range of 1 to 30.
Example:
When recalling the course number 3, press
the and keys.
The job name of the course number
should be written down when program-
ming.
To check the process of the course,
press the button.
- When the course number is input, the back-
gauge moves to the position of the step 1 and
the machine becomes ready to be operated.
WARNING
This machine must be operated by just one
person at a time.
CAUTION
Do not cut anything besides paper. This
may damage the machine.
SELECT COURSE (1-30)
LED
1
Course number
can be input.
(“1” appears as
default value.)
3
Ent
2:280.0
1 / 3 COURSE:3
1:320.0
E13:NOT AVAILABLE
PRESS "Ent"
COURSE:20
NO MEMORY
This message appears
on the screen and the
backgauge moves to the
position of the step 1
(320.0).
When the course
number 3 is input,
This message
appears on the
screen.
When the incorrect course
number is input,
Press the key and input the
correct number again.
Ent
When the empty course
number is input,
appears.
To cancel the cutting operation by programmed
value, press the button.