53
18. ERROR MESSAGES
When paper jamming, errors, malfunctions occur, details are displayed on the left or right window.
The following describes the error messages and solutions.
If the unit still does not operate normally even after implementing the following solutions, contact
your nearest dealer.
Be sure to disconnect the power cord from the outlet before implementing a solution.
Note
Note
(1) Error message displayed on the left window
Display
Details of display
No paper on the paper feed tray
Solution
Stack paper on the paper feed tray.
(2) Error messages displayed on the right window
Display
Details of display
The top cover is open.
Folding plate 1 is not set correctly.
Folding plate 2 is not set correctly.
Paper is not fed normally due to mis-
feeding (slips), etc.
Paper jamming at paper feed section
Paper jamming inside this unit
Paper jamming at paper ejection section
The stacking direction of the paper on the
paper feed tray is incorrect (example:
stacking LTR in long edge feeding
direction detects LGR).
The paper feed tray is not set at the paper
feed position.
Malfunction of main motor.
Abnormal load on the motor due to paper
jamming, etc.
Malfunction of stacker roller motor.
Abnormal load on the motor due to paper
jamming, etc.
Malfunction of folding plate 1 motor.
Control cord 1 of folding plate 1 is not
connected properly.
Malfunction of folding plate 2 motor.
Control cord 2 of folding plate 2 is not
connected properly.
Solution
Close the cover.
Set back correctly.
Set back correctly.
Adjust the paper feed pressure and paper
separating pressure.
Remove the jammed paper.
Remove the jammed paper.
Remove the jammed paper.
Stack paper in the correct direction.
Lower the paper set lever to set the paper
feed tray at the paper feed position.
Remove the jammed paper.
Remove the jammed paper.
Check the connection of control cord 1.
Check the connection of control cord 2.
(Alternately displayed)
(Alternately displayed)
(Alternately displayed)
(Alternately displayed)
