27
9. STANDARD FOLDING OF STANDARD PAPER
Select the counter type.
The counter can be selected from “subtract counter” which displays the preset number of sheets to be folded and folds
according to this value or “add counter” which displays the number of sheets already folded.
With the subtract counter, the unit will automatically stop when the set number of sheets to be folded is reached. This
method is convenient if the number of sheets to be folded has been decided.
The count is displayed on the right window. When the subtract counter is selected, a period will be displayed at the bottom
right. The number of digits displayed is three at maximum (999.) for the subtract counter and four at maximum (9999) for
the add counter.
12
When the power is turned ON, the counter will start counting from 0 by the add counter. To use the subtract
counter, set the number of sheets to be processed every time the power is turned ON.
Note
Note
Setting the subtract counter
q
Check that the counter is displayed on the right
window. If the paper length is displayed, press the
No. of sheets/Paper length key to display the
counter.
w
Use the Paper length/Stacker roller position key and
set the number of sheets to be processed between
“1.” and “999.”.
Pressing the “+” key each time increases the number
of sheets set by one, and pressing the “–” key
decreases by one. To increase/decrease the value
continuously, press the “+” or “–” key continuously.
To reset the value to 0, press the clear key.
However setting to 0 will set the add
counter.
Note
Note
Setting the add counter
q
Check that the counter is displayed on the right
window. If the paper length is displayed, press the
No. of sheets/Paper length key to display the
counter.
w
When the counter shows 0, no settings are required.
If it shows a value other than 0, press the clear key to
reset the counter to 0.
No. of sheets/Paper length key
Right window
(Counter)
Clear key
Press the start key to start folding.
To cancel operations halfway through, press the stop
key. Pressing the start key another time resumes
operations.
The buzzer will sound “pi…pi…” if the counter reaches
0 while using the subtract counter, and the unit will
stop automatically. (The counter will once again show
the set number of sheets to be processed.)
If the paper feed tray runs out of paper, the buzzer
sounds “pi.pi.pi”, and the unit will stop automatically.
13
Right window
(Counter)
No. of sheets/Paper length key
Paper length/Stacker roller
position key
Clear key
Period
