26
9. STANDARD FOLDING OF STANDARD PAPER
Press the test key to perform test folding.
When the test key is pressed, the number in the right window blinks, and the folding stopper starts moving to the set
position. When it completes moving, the number stops blinking and lights up, and test folding starts.
Test folding feeds two sheets of paper and allows the finish to be checked.
Test folded paper are not counted in the number of sheets processed.
10
If the unit does not start even if the test key is pressed, the automatic paper size detection function may not
be working. Check if the paper feed guides are at the appropriate paper size on the scale.
When the automatic paper size detection function starts working, the paper size will be displayed on the
left window.
(Refer to “7-3. Automatic Detection of Paper Size” (
☞
p.20).)
Note
Note
Folded paper
Check the finish of test folding.
Check for folding misalignment using the second test
folded sample.
If folding problems occur, refer to the following pages
according to the folded state.
Folding misalignment along the vertical
length of the paper ................................... (
☞
p.29)
Folding misalignment along the sides of
the paper ................................................. (
☞
p.28)
Deformed folding ..................................... (
☞
p.34)
11
<Normal folding>
<Folding misalignment
along sides of paper>
<Deformed folding>
<Folding misalignment along
vertical length of paper>
