34
10. FOLDING MISALIGNMENT
(1) Is appropriate paper within the specifications used?
Do not use paper outside the specifications. Particularly, deformed folding occurs frequently in the use of thin,
flimsy paper not appropriate for the paper folder.
“21. SPECIFICATIONS” (
☞
p.59)
(2) Is the processing speed too fast?
Lower the processing speed when deformed folding occurs for thin and flimsy paper.
e
See
(3) Was the paper fanned appropriately
prior to stacking on the paper feed
tray?
Fan paper well prior to stacking.
(4) Is the paper stacked correctly on the
paper feed tray?
Stack paper on the paper feed tray after aligning
well, and set the paper feed guides at the correct
positions. Also tighten the fixing screws of the
paper feed guides firmly.
Fixing screw
Paper feed guides
10-3. Correcting Deformed Folding
The paper fed to the folding plates may be
folded without reaching the folding stoppers
inside the folding plates due to the using
environment (temperature, humidity), paper
thickness, paper type, paper grain direction,
paper state such as curling, processing speed,
etc., resulting in deformed folding.
If this occurs, check the following.
<Example of deformed folding>
