my baby Lou LU-BFL205, Руководство пользователя

Страница: 12 / 74

Installation for group II configuration
Installation for group III configuration
For Group II (15-25 kg):
Fold the isofix connector out and install it to the cars counterpart, then seat the child into the seat, pull
out the vehicle belt and pass the bottom part through the bottom of the armrest and over the child's leg,
put the top part over the childs shoulder (pass the belt trough the opening on the headrest of the
carseat), then lock by putting it into the designated buckle. (see pictures)
For Group III (22-36 kg):
Remove the backrest from the child car seat to use the booster seperately, fold the isofix connector
out and install it to the cars counterpart, push the booster against the vehicle seat tightly. Then seat the
child into the seat, pull out the vehicle belt and pass the bottom part through the bottom of the armrest
and over the child's leg, put the top part over the childs shoulder (like you would use it without the
booster), then lock by putting it into the designated buckle. (see pictures)
EN
EN
Caution! Take care that the safety belt is not tangled, twisted or stuck in the cars door
or other stuck in other car parts.
Caution! Take care that the safety belt is not tangled, twisted or stuck in the cars door
or other stuck in other car parts.