19
PPH75B - NLFREN - v1.1 - 29052017
EN
•
Check to ensure that all applicable bolts and nuts are firmly tightened.
• Ensure that workpiece is center-loaded and secure.
• Keep hands and feet away from bed area at all times.
• Do not use the shop press to compress spring or any other item that could disengage and cause a potential hazard.
Never stand directly in front of loaded press and never leave loaded press unattended.
•
Do not operate the press when you are tired or under the influence of alcohol, drugs or any intoxicating medication.
• Do not allow untrained persons to operate the press.
•
Do not make any modifications to the press.
•
Do not use brake fluid or any other improper fluid and avoid mixing different types of oil when adding hydraulic oil.
Only a good quality hydraulic jack oil can be used.
• Do not expose the press to rain or any other kind of bad weather.
• If the press need repairing and/or there are any parts that need to be replaced, have it repaired by authorized
technicians and only use the replacement parts supplied by the manufacturer.
•
Attach visible signs on the equipment so that anyone recognizes and understands that maintenance or inspection is
on going.
• Post a list with emergency phone numbers nearby the working area.
• Before maintenance pressured parts in the machine, you MUST release the pressure in the pressured system. At
the same time, DO NOT stand in the direction facing the charger, the operator should on the opposite side and
remember DO NOT strike, press or transfer until it is discharged.
• When it is necessary to exchange die after running, operators should wear glove or use tools to operate avoid being
hurt.
WARNING
Immediately stop operating the equipment if not working properly. Contact a certified
technical support engineers for repair. The equipment must not be operated without
approval from the certified technical support engineer.
The warnings, cautions and instructions discussed in this instruction manual cannot cover
all possible conditions and situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into this product, but must
be supplied by the operator.
1.3 Warning labels attached on the machine
Hand crush force from above
Read operator’s manual
Consult technical manual for proper service
procedure
Wear protective clothes
Wear protective gloves
Wear a safety helmet
Wear protective shoes
Wear ear protector
copyrighted
document
- all
rights
reserved
by
FBC
