18
PPH75B - NLFREN - v1.1 - 29052017
EN
1 Safety
1.1 Hazard symbols used in this manual
This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
danger. These symbols describe the level of danger involved in performing a job on the tool and the precautions to take
to avoid the hazard.
Term
Sign
Description
DANGER
Imminently hazardous situation that if not avoided, will result un death
or serious injury.
WARNING
Potentially hazardous situation, which if not avoided, could result in
death or serious injury.
CAUTION
Potentially hazardous situation, which if not avoided, may result in
minor or moderate injury
INFORMATION
Additional information with the purpose of adding or emphasizing
important points in the text.
1.2 Safety instructions
• Make sure to read, understand, and strictly follow all safety related instructions before operation or maintenance of
this equipment.
• The machinery described is intended for machinery production and assembling spare parts. It is used to press, size,
assemble, rivet small parts in process and not for other use.
•
Installation, operation and maintenance of the equipment should be carried out by qualified personnel. A qualified
person is someone who is technically competent and familiar with all safety information and established safety
practices with the installation process, operation and maintenance of this equipment; and with all the hazards
involved.
•
Use a qualified person to maintain the press in good condition. Keep it clean for best and safest performance.
• The maximum load is 50 tons. Do not exceed this rated capacity. Never apply excessive force to a workpiece and
always use the pressure gauge to accurately determine the applied load.
• Use this press for the purpose for which it is intended. Do not use it for any other purpose it is not designed to
perform.
• Keep children and unauthorized persons away from the work area.
•
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery, and contain long hair.
• Wear impact safety goggles, full-face impact safety shield and heavy-duty work gloves when operating the press.
• Keep proper balance and footing, do not overreach and wear nonslip footwear.
• Only use this press on a surface that is stable, level, dry and not slippery, and capable of sustaining the load. Keep
the surface clean, tidy and free from unrelated materials and ensure that there is adequate lighting.
• Inspect the press before each use. Do not use if bent, broken, cracked, leaking or otherwise damaged , any suspect
parts are noted or it has been subjected to a shock load.
Contents
1 Safety ........................................................................................................................................................ 18
2 Technical specifications
................................................................................................................................ 20
3 Prepare before using .................................................................................................................................... 21
4 Operation ...................................................................................................................................................24
5 Trouble shooting ...........................................................................................................................................25
6 Maintenance ...............................................................................................................................................25
7 Spare parts .................................................................................................................................................26
8 EC declaration of conformity ..........................................................................................................................32
copyrighted
document
- all
rights
reserved
by
FBC
