MV Agusta Rivale 800, Руководство по ремонту

Страница: 85 / 456

Maintenance
- 69 -
B
- By pressing the “OK” key for more than three sec-
onds, all the previously acquired times will be can-
celled. By pressing the “SET” key for less than
three
seconds, the cancellation procedure will be interrupt-
ed.
- Once all the data have been cancelled, press the
“SET” key to exit the “ALL LAPS RESET” mode and
to return to the “CHRONO” mode.
Selecting the ABS functions *
- Press “SET” in order to access to “ABS” mode; “SET-
TING ABS” appears on the display.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral,
the motorbike stationary with your feet on
the ground. Do not change the display while
driving.
- Press “OK” for less than three seconds: “ABS ON”
starts blinking on the display.
- If you do not press any button, after three seconds the
“ABS ON” selection is confirmed; under this condition,
the ABS system is activated. Press “SET” to exit the
“ABS” mode.
(*): This function is present only on certain models