MV Agusta Rivale 800, Руководство по ремонту

Страница: 78 / 456

- 62 -
Maintenance
B
“TC” Mode
- Press “SET” in order to access to “TC” mode, then
press “OK” for less than three seconds until “TC
LEVEL” appears. The current traction control level is
the same as the one shown on the display.
NOTE
The traction control level may be changed
or set even during the use of the vehicle.
- If the “SPEED LIMITER” function has been enabled,
when riding the vehicle the speed value shown on the
odometer starts blinking when it reaches the set value
of the maximum speed.
- Press “OK” for less than three seconds: the traction
control level rises up to the next value.
On the other
hand, by pressing “SET” for less than three seconds,
the traction control level decreases to the lower value.
Such value may range between
0 and 8 .
- Press “SET” for over three seconds to confirm the
selected traction control level.