MV Agusta Rivale 800, Руководство по ремонту

Страница: 213 / 456

Electrical system
- 33 -
E
SPEED SENSOR
Whenever the speed is not indicated on the dashboard
and the message SPEED SENSOR appears, proceed
as follows:
RIVALE 800
• Check the conditions of the fuse in position 5 on the
fuse box.
RIVALE 800 ABS
• The vehicles with ABS are checked using the diag-
nostics tool.
If the fuse in question is in good condition, proceed
with the check of the speed sensor as follows:
Keeping the sensor connected to the system and with
the key ON, use a Tester to make sure that when the
sensor is placed in front of a tooth of the phonic wheel,
between terminal
3 and terminal 2 of the connector,
that the voltage is close to zero, whilst when it is not
placed in front of one of the nuts, the voltage is close
to that of the battery.
DIPPING BEAM
In the event that the dipping beam does not work,
check the conditions of fuse
4 on the fuse box. If this
fuse is ok, check the conditions of the relay situated on
the left side of the motorcycle, with the label "
B ".
If this condition is also met, check the continuity of the
R/B cable, which goes from relay "
B " to terminal C3 of
the motor control unit vehicle connector.
1
7
2 3
4
5
6
8
9
10
1
7
2
3
4
5
6
NO ABS
ABS