MV Agusta Rivale 800, Руководство по ремонту

Страница: 48 / 456

- 32 -
Maintenance
B
Before completing the operation, clean and wash accu-
rately with alcohol the three components of the fluid
chamber cover and blow to dry them.
Clean the edge of the fluid chamber with a clean cloth.
Screw and tighten the two screws on the front brake
reservoir cap with its components.
Imperfect cleaning of these parts could
cause the discharge of small quantities of
brake fluid during riding. Brake fluid has
strong corrosive properties.
Check for any leakage or seepage of brake fluid from
the fittings and pipes.
If any breakages are seen, substitute the damaged
parts as described in chapter H “Brakes”.
Brake fluid leakages are dangerous and
immediately discolour painted surfaces.
Before riding, check the tubes and joints of
the brakes for damage and signs of leaks.
Add brake fluid until the correct level is reached in the
chamber.
Recommended brake fluid: AGIP Brake 4
Do not use brake fluid that comes from old
containers, has already been used or does
not come from a sealed container. Do not
use brake fluid that is left over from previ-
ous maintenance or stored for long peri-
ods. Utilise only the recommended brake
fluids.