MuxLab MuxStream 500930, Руководство по эксплуатации

Страница: 19 / 47

MuxStream Camera Operation Manual
19
Protocol: Control protocol type. Optional settings:
AUTO, VISCA, PELCO-D, PELCO-P
V_Address: Protocol address, To be decided
according to the agreement, AUTO, VISCA
protocol Optional settings: 1 to 7
P_D_Address: PELCO-D protocol Optional
settings: 0 to 254
P_P_Address: PELCO-P protocol Optional
settings: 0 to 31
V_AddrFix: Allows you to scan through the serial
port infrared switch setting, Optional settings: On,
Off
（ When set to On, the 88 30 01 FF Command is
useless ）
Net Mode: Set the serial port control or networking,
Optional settings: Serial, Paral
Baudrate: Serial port baud rate. Optional settings:
2400, 4800, and 9600
9.RESTORE DEFAULT
Move the cursor to the Restore Default submenu in
the main menu and press the [home] button. The
RESTORE DEFAULT submenu will appear as
shown in the following figure.
Restore: Confirm restore factory settings.
Optional settings: Yes, No
Note: Press the [HOME] button to confirm, and
ALL parameters will be restored to their factory
default setting, Include IR Remote
address and VISICA Address
Save: Save Options. Optional settings: Yes, No
COMMUNICATION SETUP
Protocol
VISCA
V_Address 1
V_AddrFix Off
Net Mode Serial
Baudrate 9600
Select Item
Change Value
[Menu] Back
RESTORE DEFAULT
Restore? No
Change Value
[Home] OK
[Menu] Back