MuxLab MuxStream 500930, Руководство по эксплуатации

Страница: 30 / 47

MuxStream Camera Operation Manual
30
1. Access the network with a PC to test whether the network works, to eliminate the possibility of
a faulty cable, or network failure caused by a PC virus. Ping the PC to confirm proper operation.
2. Disconnect the IP Camera from the network, and connect the IP Camera to the PC and verify or
reset the camera IP address.
3. Check the server's IP address and subnet mask and gateway address.
4. MAC addresses conflict.
5. Web port is occupied by other devices.
⚫
When modifying the IP address in an incorrect manner, this may cause the wrong IP address to be
created, or if the user simply forgets his password, press the IR remote controller
"[*]+[
＃
]+[Manual]" to restore the default value (Default IP: 192.168.100.88, Default username:
admin , and Default password: admin)
Control
⚫
IR remote controller cannot control the camera
1. Change the battery
2. Check the camera’s operating mode.
3. Check that the IR address on the IR Remote Control is set correctly.
⚫
Serial communication cannot control the camera
1. Check the camera’s operating mode.
2. Check that the RS232 cable is connected correctly.
3. Check the RS232 port settings.