HDMI 4x4 Matrix Switch Kit, HDBT, PoC, 4K/60
Installation & Operation Manual
© MuxLab Inc. 2017
27
5.4. TCP/IP Control
In addition to supporting IR and RS232 control, the Matrix Switch also supports TCP/IP
control.
The default settings are: IP: 192.168.0.178; Subnet Mast: 255.255.255.0; Gateway:
192.168.0.1; Serial Port: 4001.
The IP and gateway settings can be changed as needed, but the Serial Port value
cannot be changed.
Connect the Ethernet port of the control device (such as a PC) and the Ethernet port of
the Matrix Switch to the same network segment. This allows the user to control the
Matrix Switch via the units web-interface GUI or designed TCP/IP communication
software.
5.4.1. Control Modes
The Matrix Switch can be controlled by a PC without a network connection (via a direct
connection) or by one or more PCs within a LAN.
Controlled by PC (with a direct connection)
Connect a computer
’s Ethernet port directly to the Ethernet port of the Matrix Switch,
and set
the PC’s network segment to the same as the Matrix Switch’s.
Set the PC to the same
network segment as the
Matrix Switch
