HDMI 4x4 Matrix Switch Kit, HDBT, PoC, 4K/60
Installation & Operation Manual
© MuxLab Inc. 2017
21
4)
Please disconnect all the twisted pairs before sending command EDIDUpgrade[X].
RS232 Port Settings:
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command
Function
Feedback Example
System Commands
/*Type;
Returns the model information.
XXXXX
/%Lock;
Lock the front panel buttons on the Matrix. System Locked!
/%Unlock;
Unlock the front panel buttons on the
Matrix.
System Unlock!
/^Version;
Returns the version of the firmware
VX.X.X
Demo.
Switch to “demo” mode, connecting inputs
to outputs in sequential order of all
permutation, such as 1B1, 1B
2, …4B3,
4B4, 1B1
… and so on. The switching
interval is 2 seconds, and restarts when it
reaches the end.
Demo Mode
AV:01->01, IR:01->01
AV:01->02, IR:01->02
……
AV:04->04, IR:04->04
AV:01->01, IR:01->01
……
Operation Commands
[x]All.
Transfer signals from the input channel [x]
to all output channels
X To All. (X=01~04)
All#.
Transfer
all
input
signals
to
the
corresponding output channels, such as
1->1, 2->2
…
All Through.
All$.
Switch off all the output channels.
All Closed.
[x]#.
Transfer signals from the input channel [x]
to the output channel [x].
X Through
(X=01~04)
[x]$.
Switch off the output channel [x].
X Close (X=01~04)
[x]@.
Switch on the output channel [x].
X Open (X=01~04)
All@.
Switch on all output channels.
All Open.
[x1]V[x2].
Transfer the AV signal from the input
channel [x1] to one or several output
channels ([x2], separate output channels
with a comma).
AV: X1-> X2
(X1/X2=01~04)
[x1]B[x2].
Transfer the AV and IR signal from input
channel [x1] to one or several output
channels ([x2], separate output channels
AV: X1-> X2
(X1/X2=01~04)
