MUTOH Spitfire 65, Руководство по обслуживанию

Страница: 59 / 319

Spitfire – Maintenance Manual
59
AP-74096, Rev. 1.0, 09/06/05
4.3. REPLACEMENT OF THE HEATER ELEMENT
To replace a heater element of the Spitfire printer, please follow the instructions mentioned in the explanation
of the appropriate heater element.
o
1. Replacing the dryer (Heater D)
o
2. Replacing the post-fixer (Heater C)
o
3. Replacing the fixer (Heater B)
o
4. Replacing the heater (Heater A)
Caution :
¾
In case the fuse of the heating element is locked, do not replace the fuse but replace
the appropriate heater element. Installation of a fuse of the heater element needs to
be done in a special production environment.
Important :
Before replacing parts, be sure to perform the following operations.
¾
Turn the machine power OFF.
¾
Remove the product's electrical plug from the socket. Otherwise, you may
suffer electric shock or the machine’s electric circuits may be damaged.
¾
Disconnect all cables from the machine. Not doing so could cause damage to
the printer.
4.3.1. Heater elements
4.3.1.1. Replacing the dryer (Heater D) on a Spitfire
Before replacing the dryer, make sure to have following items:
¾
65” model : Dryer D1 64 and Dryer D2 64
¾
90” model : Dryer D1 87 and Dryer D2 872 x sensor insul. Patch
To replace the dryer on a Spitfire, please follow the instructions mentioned below.
Step 1 :
Remove side cover L.
Step 2 :
Remove side cover R.
Step 3 :
Remove the front cover.
Step 4 :
Remove the Y rail cover.
Step 5 : Remove the front paper guide.
Step 6 :
Remove the dryer strip(s).
Step 7 :
Degrease the plate.