MUTOH Spitfire 65, Руководство по обслуживанию

Страница: 16 / 319

Spitfire – Maintenance Manual
16
AP-74096, Rev. 1.0, 09/06/05
¾
Do not connect earth cables in the following areas.
•
Gas pipes
→
Doing so may cause fire or an explosion.
•
Earth terminals for telephone line or lightening rod
→
Doing so may cause a large flow of
voltage if lightening occurs.
•
Water pipes or faucets
→
If there is a plastic part in the pipe, the earth will not work
properly.
¾
Do not insert or drop metal or inflammable objects into openings, such as ventilation outlets.
Doing so may result in electrical shock and fire.
¾
Stop using your printer if a liquid is spilled into it. This may cause electrical shock or fire. Turn the
printer off as soon as possible, unplug the power cord, and contact your local MUTOH dealer.
¾
Be sure to use the attached cable. Otherwise, electrical shock or fire may occur.
¾
Be sure to use the specified voltage (AC 100 V to 120V, or AC 220V to 240V). Otherwise,
electrical shock or fire may occur.
¾
Use electricity directly from a power outlet (AC 100 V to 120V, or AC 220V to 240V). Do not put
many loads on one electrical output. Otherwise, heat may be generated and cause fire.
¾
Be sure to use an outlet with an earth terminal and use the terminal correctly. Otherwise,
electrical shock or fire may occur.
¾
Follow the instructions below when handling the power cable.
o
Do not modify the cable.
o
Do not put heavy objects on the cable.
o
Do not bend, twist or pull the cable.
o
Do not wire the cable near equipment that generates heat.
¾
Follow the instructions below when handling the power plug. Otherwise, fire may occur.
o
Wipe away dust and any other residue before inserting the plug.
o
Ensure that the plug is firmly inserted as far as it will go.
¾
When handling the foot switch, be aware of the following:
o
Do not place anything heavy on the foot switch.
o
Do not bend the cable of the foot switch with force and do not pull.
o
Do not place the foot switch near thermal devices.
¾
When handling ink cassettes, be careful that ink does not get in your eyes or on your skin.
However, if this happens, flush immediately with water and wash skin with soap. Otherwise, your
eyes may become congested or inflamed slightly. If you feel discomfort, consult a doctor
immediately.
¾
Do not disassemble ink cassettes. Otherwise, ink may get in your eyes or on your skin.
¾
Be careful not to pinch your fingers when opening and closing the cover of the ink compartment.
¾
Be careful not to pinch your fingers when opening and closing the front cover.
¾
Follow the instructions below when connecting the network interface cable. Otherwise, electrical
shock or fire may occur.
o
Do not touch the connector.
o
Do not connect the network cable connector that is not the same specification to the
interface board.
¾
When cutting the roll media, be careful of the following. Incorrect handling can result in injury to
the hands and fingers from the razor blade.
o
When holding the media, do not place fingers over the media cut groove.
o
Move the razor blade slowly along the media cutting groove.