MUTOH Spitfire 65, Руководство по обслуживанию

Страница: 209 / 319

Spitfire – Maintenance Manual
209
AP-74096, Rev. 1.0, 09/06/05
6.3.3. MAC address write enable menu
It could happen that the computer cannot make connection with the Spitfire. If this is the case, the MAC
address of the Spitfire has probably been set to zero or incorrect.
To insert the MAC address into the Spitfire, please follow the instructions mentioned below.
Notes :
¾
For the MAC address, a unique number is assigned for each unit. Do not use this
function except when intending to recover following deletion of the MAC address.
6.3.3.1. Request correct MAC address
Step 1 : Remove the Right Cover.
Step 2 : Remove the Ethernet Board Cover.
Step 3 : Onto the installed card you can see a sticker with a ‘FM0 number’.
Notes :
Write down this number ‘FM0 xxxxxx’. Important are the 6 digits ‘x’.
Step 4 : Based on this number Mutoh Europe’s service department can provide you the correct MAC
address for your printer.
Step 5 : Reinstall the covers.
6.3.3.2. Insert the MAC address into the printer
Step 1 : Power on the unit in a special mode. Press the [POWER] key to power ON the unit, while
simultaneously holding the [F1], [F3] and [Menu
↑
] key.
Step 2 : The unit will start up in special mode. Following message will appear on the display.
* Counter *
Indication InitMenu
F3
→
MACaddress
Step 3 : Press the [F3] key to select the option ‘MAC Address’. Following message will appear on the
display.
* MAC address *
Input Password
Step 4 : Press the [F2] key.
Step 5 : Press the [F3] key.