MUTOH Spitfire 100 Extreme, Руководство пользователя

Страница: 174 / 177

Spitfire 100 Extreme series printers – User’s Guide
174 AP-75194 - Rev. 2.2
7.3.5 Error requiring a restart
Following are descriptions and solutions requiring a restart.
Errors requiring a restart are displayed when the following fatal error occurred during printer operation.
Foreign material disturbing the printer operation is involved in the printer.
An electrical circuit (such as board, motor, or sensor) failure has occurred.
An error on the control program has occurred.
If error requiring a restart occurred, the printer prints and then stops (see below).
(1) Power relating to the driving system is shut off automatically.
(2) All indicator lights on the operation panel are switched on and beeps sound continuously.
(3) An error message is displayed.
Press any key to stop the beep sounds.
If an error requiring a restart occurred, solve the problems to restart the printer and delete the error.
If the same error message is displayed again, contact your local MUTOH dealer. Be sure to inquire the code
numbers of the error messages.
N° Message Descriptions Solutions
1 E System error***
[ ]
An error which cannot be solved
promptly has occurred. 1. If foreign materials such as a piece
of media or media dust are involved in
the driving system, remove them.
2. Make sure that the replaced parts
are correctly installed.
3. Power OFF the printer. After 10
seconds or more, power it back ON.
Notes
*** in error messages are code numbers indicating what kind of error occurred.
[ ] may indicate the command code of the error.
For the settings on a computer, refer to the computer's operation manual.
7.3.6 External errors
Errors caused by external objects or boards.
N° Message Descriptions Solutions
1 External object not found One or more boards are corrupt Call Authorized Mutoh Technician