MUTOH DT-Series, Руководство по эксплуатации

Страница: 50 / 96

Mutoh’s DT-Series Printers – Operation Instructions
50
AP-75171, Rev. 1.1, 25/06/04
3.6. INSTALLING INK CASSETTES
The installation of ink cassettes for the first time into the unit is explained below.
Caution :
•
Before powering ON the unit, make sure the waste bottle is installed, the clamps of
the waste tubing are removed and the dummy cassettes are removed.
Caution :
¾
When handling ink cassettes, be careful that ink does not get in your eyes or on your
skin. However, if this happens, flush immediately with water. Otherwise, your eyes
may become congested or inflamed slightly. If you feel discomfort, consult a doctor
immediately.
¾
Do not disassemble ink cassettes. Otherwise, ink may get in your eyes or on your
skin.
¾
Do not shake ink cassettes strongly. Otherwise, ink may leak.
Notes :
The unit is delivered / shipped with special shipping liquid. This to prevent air coming
into the ink supply system. Make sure that air never comes into the ink supply system.
To install ink cassettes, follow the steps below.
Caution :
¾
Before powering ON the unit for the first time, make sure to:
ƒ
Remove the dummy cassettes
ƒ
Remove the waste tube clamps
ƒ
Remove the bag enclosing the waste tubes
ƒ
Connect the waste tubes
Step 1 :
Before powering ON the unit for the first time, please be sure to have :
¾
8 cleaning cassettes compatible with the ink
¾
8 ink cassettes of the requested ink configuration
Step 2 :
Check if the Waste Bottle is empty.