MUTOH DT-Series, Руководство по эксплуатации

Страница: 17 / 96

Mutoh’s DT-Series Printers – Operation Instructions
17
AP-75171, Rev. 1.1, 25/06/04
Caution :
•
The size of the recommended media can change at a fixed ratio according to the
temperature changes of the working environment. Before using media, place the
media roll in the working environment for at least 24 hours, to have it match to the
temperature of the working area.
•
Printing before the media could accommodate to the printing environment may
cause media jams due to slippage or creases. This also adversely effects the
quality of printing.
1.5.1.3. Pre-heating of the transfer paper
The DT-series printer is equipped with a pre-heater. (Range up to 50°C.)
Caution :
•
We recommend you to set the pre-heater temperature at 50°C. This to be sure that
transfer paper is already expanded a little before reaching the pressure rollers.
1.5.1.4. Extra fans
The DT-series printer is equipped with extra fans to keep the transfer paper flat on the print platform.
Caution :
•
We recommend you to select “HIGH” in the vacuum menu. Only use “Low” or
“Medium” when using sheet media.
1.5.1.5. Pressure rollers disabler tool
The pressure roller disabler tool allows a pressure roller to be lifted while printing, thus providing the
necessary space for media to expand.
Caution :
•
When using roll media, we recommend you to use two pressure rollers disabler
tools on both side of the media, as well as two on 1/3 and two on 2/3 of the media.
•
It is not necessary to use pressure rollers disabler tools when using sheet media.