MUTOH DT-Series, Руководство по эксплуатации

Страница: 21 / 96

Mutoh’s DT-Series Printers – Operation Instructions
21
AP-75171, Rev. 1.1, 25/06/04
2. INSTALLATION PROCEDURES
2.1. INSTALLATION ENVIRONMENT REQUIREMENTS
Install the unit on a proper location referring to the following.
Important :
•
Do not place the printer on a location under the following conditions. Doing
so may cause the product to fall, become damaged, or cause injury.
o
Unstable surfaces
o
Slanted surfaces
o
Locations that are subject to vibration from other product
•
Do not stand on the printer or place any heavy objects on it. Doing so may
cause it to fall over, become damaged, or cause injury.
•
Do not cover the ventilation hole of the printer with cloth, such as a blanket
or table cloth. Doing so could prevent the printer from ventilating and cause
fire.
•
Keep the printer away from humid and dusty areas. Humidity may result in
electrical shock or fire.
Choose a place for printer installation following the requirements in the table below.
65” model 12.7m² (144ft²) or larger. Frontage of 4.7m (15.7ft) or greater. Area
90” model 14.3m² (162ft²) or larger. Frontage of 5.3m (17.7ft) or greater.
Floor loading capability 2490Pa (300kg/m²) or over
Voltage AC100V - 120V or AC220V – 240V
Frequency
50/60Hz
±
1Hz
Electrical
Capacity AC100V - 120V: 12A or more
AC220V - 240V: 6A or more
Recommended
working environment
Temperature: 25
℃
Humidity: 30% to 60%, without condensation
Operational conditions
Temperature: 19
℃
to 26
℃
Humidity: 30% to 60%, without condensation
Rate of change
Temperature: No more than 2
℃
per hour
Humidity: No more than 5% per hour
Environmental
Storage environment
Temperature: -20
℃
to 60
℃
Humidity: 5
％
to 85%, without condensation (When ink has
been discharged.)