Mutec SMART DIGITAL SMART CLOCK, Руководство по эксплуатации

Страница: 19 / 22

������������
�� � � � � � �
�� � � � � � �
�� � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
��
���������������������������������������������
19
1) Use DIP switch »a« (see above, right) to select the basic
video signal type. The marking OFF is not relevant, only the
position of the switch.
a) Video signal type
PAL / NTSC Black + Burst
PAL / NTSC Composite Sync
The factory default is black + burst.
2) Use this slide switch to select the basic video signal.
PAL oder NTSC
The factory default is PAL.
NTSC PAL
Please note that video signal selection
always refers to all corresponding outputs.
Parallel output of PAL and NTSC signals is
not possible!
Setting PAL or NTSC
Do not change
this switch
position!
b
Black + Burst
a
Composite Sync
Setting the video signal type