� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
��
�
� � � � � � � � � � � � � �
� � � � � � � � � � � � � �
� � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
��������������������������������������������
17
APPENDIX
Pin Assignment of the Connectors
MAINS
3
2
1
1
3
2
1 Live, phase (brown; USA: black)
2 Protective earth (green/yellow; USA: green)
3 Neutral (blue; USA: white)
AES/EBU XLR-Output
CINCH: OUPUT
BNC-OUTPUT
1 Audio signal
1 Signal
2 Audio ground
2 Ground
2
1
1
2
1 Audio ground
2 a conductor (hot / +)
3 b conductor (cold / -)
Replacing the Mains Fuse
Disconnect the power cord from
both the wall outlet and the unit
before you attempt to replace the
mains fuse!
Make sure that the fuse holder is inserted
completely down to the bottom of its socket
and that the compartment is fully closed!
!
Use a small, flat-blade screwdriver to open the compartment that houses
the fuse holder. Carefully pull out the fuse holder from its socket. Turn it
by 180° and re-insert it into its socket. After closing the compartment, the
second mains voltage marker must be visible through the window in the
compartment cover.
