Musway DSP68PRO, Руководство пользователя

Страница: 9 / 24

9
ENGLISH
REM SPK
The device can be turned on/off by using the following methods:
SPK: Slide the switch into position SPK, if you want to turn on/off the device through
the CH1 input channel of the high level speaker inputs and its Auto Turn-On function.
REM: Slide the switch into position REM, if you want to turn on/off the device through the REM and
a turn-on signal from head unit/car stereo in low level operation (see # 7)
GND ISO
This switch defines the ground connection between the input and output signal:
GND: Slide the switch into position GND if the input signal is a preamplifier low level signal.
ISO: Slide the switch into position ISO if the input signal is a high level signal.
8
9
CLIPPING LED
This LED lights up red if one of the 8 high level inputs (CH1-8) is overdriven. The LED has no function
when an input signal is applied to the Optical input and the Bluetooth™ input. If this LED lights up
reduce the input sensitivity by using the regarding controller Input Sensitivity until the LED goes out.
10
INPUT SENSITIVITY
With these controllers you can adjust the input sensitivity for each analog input section. This function
is suited to match the output voltage of the connected signal source with the device.
PRE. OUTPUT
These RCA outputs deliver DSP modified low level preamplifier output signals for additional amplifiers.
Connect each channel according to your sound system setup.
13
11
11 12 13
AUX
These stereo RCA inputs are suited for a auxiliary low level input signal from an external stereo pre-
amplifier source such as a game console or a media player. The input sensitivity adjustable from 2 to
15 V RMS.
12