manualshive.com logo in svg

Mustang Survival MD3188, Руководство производителя

Поделиться
Скачать
Mustang Survival MD3188 Скачать руководство пользователя страница 5

2

APPROVAL CONDITIONS AND CARRIAGE REGULATIONS

Commercial Vessels 

– Model MD3188 is approved by the U.S. Coast 

Guard (USCG) as a Work Vest ONLY WHEN WORN under 46 CFR 
160.053 for use on all inspected and uninspected commercial vessels 
of any length. 

Not approved for “hot work,”

 such as burning, welding, 

riveting, grinding.

Uninspected Commercial Vessels

 – Model MD3188 is USCG-approved 

for use in lieu of a Type II PFD under 46 CFR 160.064 on uninspected 
commercial vessels less than 40 feet in length not carrying 
passengers for hire when used and serviced in accordance with this 
manufacturer's manual. 

CONDITIONS FOR COMMERCIAL TYPE V AND/OR WORK VEST APPROVAL IN 
COMMERCIAL APPLICATIONS 

1.  The MD3188 must be worn before getting underway and 

whenever above deck and not within an enclosed space to meet 
the carriage requirement.

2.  The operator of a commercial vessel is responsible for servicing 

and maintaining the MD3188 in good serviceable condition in 
accordance with this manufacturer's manual. See “Care and 
Maintenance Instructions,” page 18, for servicing information.

3.  The operator of a commercial vessel is responsible for providing 

each person onboard with the safety information required for use 
of the MD3188. See “Note to Commercial Vessel Operators,”  
page 3, for information.

4.  All inflatable PFDs in use aboard a commercial vessel must be 

the same manufacturer and model or have the same method of 
operation. Hydrostatic inflation and pill or bobbin type inflation 
do not qualify as the same method of operation. 

Recreational Boats

 – Model MD3188 is approved by the USCG for use 

as a Type II Personal Flotation Device (PFD). It is not approved for 
water skiing or other high impact, high speed activities. This inflatable 
PFD was designed to be more comfortable and less restrictive to 
wear than inherently buoyant PFDs. When worn, used, and serviced 
according to this manufacturer's manual, this PFD can greatly increase 
your chances of survival in the water. 

Not recommended for non-

swimmers or weak swimmers. 

Users of inflatable PFDs must be at 

least 16 years old.

Содержание MD3188





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды