I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
Supply Connections
M-OBR4-GRD
Page 8 of 17
New: 12
/01/17
7020-960-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
OUTDOOR BOTTLE FILLERS
1
3/8" OD Water Supply Line
Shut-Off Valve
Fixture Supply Inlet
1
2
3
3/8" OD Shut-Off Valve (Ref. Only)
3/8" OD Water Supply Tubing (Ref. Only)
1
2
2
Multiple Water Supply connections are required from the Building
Water Supply Line to connect to (2) 1/4" NCT x 1/4" OD Push-In
Y-Strainers and 1/4" NPT Male Fitting for the Bottle Filler Supply
Line (See Steps 3 and 4).
DO NOT SOLDER
. Soldering will
damage strainer O-Ring preventing a watertight seal. Layout
shown for reference only.
To Building Water
Supply Line
3/8" OD Push-in Tee (Ref. Only)
3
6
1/4" NCT x 1/4" OD Push-In Y-Strainer
7
1/4" OD x 1/4" NPT Male Fitting
9
1/4" OD Water Supply Tubing to Bottle Filler
3/8" OD Push-in Elbow (Ref. Only)
4
3/8" OD Push-in x 1/4" Female NPT (Ref. Only)
5
4
3
3
2
2
2
2
6
8
9
7
5
6
8
1
To Building Water
Supply Line
2
1
3
It is recommended that a supply stop be installed before making up
connections to the fixture 3/8” OD supply inlet.
8
1/4" OD Water Supply Tubing to
Drinking Fountain