I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
Mounting Installation (Continued)
M-OBR4-GRD
Page 5 of 17
New: 12
/01/17
7020-960-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
OUTDOOR BOTTLE FILLERS
Mounting Plate
2x6 Stud Frame
Finish Wall, Ref. only
1
2
3
2
Separate Fixture Panel, Bottle Filler Box, Mounting Plate and #10-32 x 1/4"
Screws from packaging careful to avoid damage to fixtures and fixture
sub-assemblies.
5
Anchoring Hardware,
4
4
1
2
3
Finished
Floor
36"
26
7
8
"
1
28
1
2
"
3
Supporting Mounting Plate against wall, align Bottle Filler opening and
Mounting Plate Ø1/4" Anchoring holes with structural support before fixing to
wall with installer provided Anchoring Hardware.
provided by others
2
3
4
Bottle Filler Panel
Mounting Plate
Waste Outlet, Ref. only
1
2
3
Bottle Filler Box
4
(Plumbing may vary)
(4) #10-32 x 1/4" Phillps
5
Head Screws