INSTALLATION:
Choose configuration; Remove and reinstall Filler Plate, item 23 and reverse Drain Assembly if required for
alternate mounting configuration.
1. Mount Hanger Bracket to wall horizontally level as shown in Roughing-In and Dimensional Drawing. Note: Adjust height of
Bracket if Bubbler outlet height is required to vary from that shown. Hanger Bracket MUST be securely anchored to wall
with fasteners sufficient to support 3 times the weight of Drinking Fountain. If wall can not provide adequate support, order
and install optional fixture support carrier.
2. Remove the Bottom Cover from the Drinking Fountain and set aside in a safe place. Save the Screws in a secure location
for re-use in later stages of installation.
3.
Hang the Drinking Fountain on the Hanger Brackets ensuring the Bracket Tabs engage AND seat in the slots in the back of
the Drinking Fountain. Verify Drinking Fountains are level, left to right AND front to back from bottom of unit. CAUTION
:
The Bubbler stream may be adversely affected if units are not square and level. Bottom of units and Louvers should be
used as reference to verify unit is square and plumb.
4. Anchor the Drinking Fountain to the wall at the lower mounting points in each Back Panel. Shim lower mounting points to
level unit if necessary.
5. Thoroughly flush the 3/8” O.D. supply line and then connect Drinking Fountain to Water Supply Angle Stop Valve (by
others) with supplied 3/8” O.D. Copper Tube.
6. Use supplied Flexible Hose and Clamps to connect Waste Tailpiece from the upper unit to the Waste Tailpiece of lower unit
and then make up 1-1/4” O.D. P-Trap waste connection. Waste P-Trap by others.
7. For outdoor installation, see outdoor installation instructions (Page 5)
STANDARD WASTE CONFIGURATION
ALTERNATE WASTE CONFIGURATION
ITEM 23
FILLER PLATE
ITEM 23
FILLER PLATE
A172VR
Page 4 of 10
Revised:
12/22/17
7020-917-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
DRINKING FOUNTAIN
