This fixture is intended to dispense water that has been lowered in temperature, but otherwise remains
unchanged by the materials in the water cooler. It is common for electrical equipment to be grounded
to water lines either within a structure or away from it. Every attempt should be made to prevent this
kind of grounding from generating electrical feedback into the water cooler creating electrolysis.
Electrolysis will cause a metallic taste or cause water metal content to increase.
NOTICE
A dielectric coupling must be used to connect the water cooler to the water supply . A nonmetallic
coupler is furnished with this water cooler to meet this requirement.
IMPORTANT
ROUGHING-IN AND DIMENSIONAL DRAWING
Prior to roughing consult with local, state, and federal codes for proper mounting height.
A152408S-FG & A152408F-FG Refrigerated Bi-Level Wall Mounted Drinking Fountain
NOTES:
Dimensions shown for Adult ADA compliant installation. For Child ADA compliant parallel
approach installation, decrease height of installation by 3 inches. Provide clear floor space as required.
Adjust vertical dimensions as required to comply with federal, state, and local codes.
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
DRINKING FOUNTAINS
A152.8FG
Page 2 of 9
Revised:
07/18/18
7020-006-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
FINISHED FLOOR
GENERAL NOTES:
1. ALL DIMENSIONS ARE IN INCHES [MM]
*2. DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL
DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE, & LOCAL CODES
3. WATER LINE FROM CHILLER TO FOUNTAIN SHOULD BE COVERED WITH SPONGE FOAM
RUBBER OR ICE WATER TYPE INSULATION OF ADEQUATE THICKNESS
1
3
8
"
4
1
2
"
*33
1
2
"
SUPPLY STOP
VALVE BY
OTHERS
19
1
4
"
20"
30
1
4
"
WALL
OPENING
3/8" OD SUPPLY
INLET
11"
WALL
OPENING
3/8" OD
COPPER
TUBING
SUPPLIED MTG
FRAME
38
3
8
"
WALL
OPENING
32"
2"
*6
1
4
"
*30"
WASTE OUTLET
FOR 1-1/4" P-TRAP
16"
2"
1
4
"
*38
3
8
"
1
4
"
8
3
8
"
